How to make airplane stands #2. I took the idea from Marks airplane units.
1) First you will need to print out the aircraft units from the files you receive after you purchase the game, on a high gloss self adhesive paper. Then you need to stick the print out on a 0.06 polystyrene sheet, and cut the stands from the sheet, pic#1.
2) You need to buy a mini aluminum drill from ebay(12 bucks) I used wire nails, cut both ends with a nail cutter, appx half an inch long.
3) Drill small holes under the airplane and one in the middle of the counter, and super glue the nail(hard wire ) in there, I usually glue them in the airplane first.